September 03 2010 15:05:21
Navigation
Home
Discussion Forum
How To's
Downloads
FAQ
Sponsors
Web Links
News Categories
Photo Gallery
Search

Muffler Comparison
For Sale
Nissan News
Users Online
Guests Online: 3

Members Online: 0

Total Members: 574
Newest Member: wany
Latest Downloads
Cammed 3.5 Sentra 2108
1995 3.5 swapped/nit... 1815
Compilation of 12sec... 2752
95 3.5 RMT Maxima dy... 2420
95 3.5 RMT Maxima dy... 1920
95 3.5 RMT Maxima dyno 1985
12sec 6Gen Maxima 3024
96 3.5 vs 150shot Stang 2805
95 3.5 swap on track... 2991
12sec NA 3L Maxima 4296
Activate the Low Washer Fluid light
First off you need to order part# 28911-1E400...I called Dave B @ 888-254-6060, call him he works @ a Nissan Dealership & will beat by far your local Nissan Dealership Price!

PLEASE KEEP IN MIND THAT PICS SHOW WASHER FLUID RESERVOIR WAS TAKEN OUT. YOU DO NOT NEED TO TAKE IT OUT, BUT I LEARNED THAT AFTER I TOOK IT OUT & SINCE IT WAS MY FIRST TIME DOING IT

1) Open plastic cover from underneath car, like you would to change the passenger side fog light.

2) Now check to see if you see wire circled in above pic. This wire is needed to make sensor work.

3) Now test-fit the sensor tube with wire.

4) Ok now to make sure it works. You need another person to help you with this step. Connect sensor tube. Now find a water bottle and cut top off like above pic, & fill with water. Now turn car on & dip sensor tube in bottle full of water. Now have other person check to see if your washer fluid warning light comes on your dash.

5) Now that you checked that it works. Have a bucket underneath & unplug tube shown in above pick to drain any washer fluid in there.

6) Now look closely at bottom left of reservoir & you should see a sketched circle where sensor tube should be.

7) Now take an 1 inch or 1 1/4 inch wood boring bit (i think that's what its called) & drill a hole were sketched circle is on reservoir. Should look like above right pic.

8) As you can see on above left pic I didn't have a perfect circle. Because I believe the 1inch bit was too small but i just went round & round to make hole bigger. *Don't make it too big & test fit tube if need to. Should be a TIGHT fit for sensor tube.*

9) Once hole is big enough. Put on rubber around hole that came with sensor tube.

10) Now insert sensor tube. Should be a tight fit!

11) Now with some silicone put it around the edges of the tube you inserted. This is just for extra protection that it wont leak.

12) Now get wire & plug into sensor tube & your DONE!!!

**To be safe I didn't re-fill my washer fluid reservoir for a couple days. Just to make sure the silicone completely dried.**

-K Pazzo 6

hd movies download dvd download
Login
Username

Password



Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.
Shoutbox
You must login to post a message.

01/08/2010 20:34
Hey fam!!!! Smile

27/07/2010 07:39
1997 NISSAN MAXIMA

26/07/2010 17:41
LOOKING FOR A BLACK MESH GRILL FOR 06 MAXIMA ANYBODY KNOW WHERE I CAN FIND ONE?

18/07/2010 22:32
hey

20/06/2010 01:52
HOW MUCH IS THE VQ35DE 4.3 LITER STROKER KIT?

Google Ads