For UK laws, my car was fitted with LED side markers. This info should be great for anyone looking to do an LED mirror or side markers.
1. The first step would be to remove the front bumper. By doing so you can expose the wiring that leads to the headlights. 2. Locate the green wire on the driver side. The passenger side is green and yellow. 3. Back the headlights you can find two bolts. You can use either of the two bolts for a ground.
Picture of the side markers
Driver side wiring harness
passenger side wiring harness
Ground
-trapped_in_UK
Posted by gtr_rider
on April 17 2008 13:16:42
826 Reads ·
I have a 95 nissan maxima that is leaking anti-freeze during the 1st 5 minutes only. It appears to be dripping just about 12 inches to the right of the overflow bottle, near the thermostat housing.
)
)
)
)
