First you pop the trunk and there is ONE screw for each side that holds the rear plastic/chrome piece on. Once you take that screw out, you can carefully pop that one piece out.
That's how it looks removed.
Now in the front you take off the black plastic thing by the windshield
Now you can carefully push on the entire assembly towards the back of the car. The thing "slips" into place, so that is how you take it out as well. When you put it back in, you can just line all of the slots up and "pop" them in.
This is how it looks with them both off.
-!PrjctMax! |
)
)
)
