February 09 2010 17:35:15
Navigation
Home
Discussion Forum
How To's
Downloads
FAQ
Sponsors
Web Links
News Categories
Photo Gallery
Search

Muffler Comparison
For Sale
Nissan News
Users Online
Guests Online: 2

Members Online: 0

Total Members: 441
Newest Member: AlexRi
Latest Downloads
Cammed 3.5 Sentra 1405
1995 3.5 swapped/nit... 1245
Compilation of 12sec... 2052
95 3.5 RMT Maxima dy... 1809
95 3.5 RMT Maxima dy... 1400
95 3.5 RMT Maxima dyno 1436
12sec 6Gen Maxima 2465
96 3.5 vs 150shot Stang 2326
95 3.5 swap on track... 2645
12sec NA 3L Maxima 3926
Always Illuminated Clock

Warning: This procedure is very dangerous, you can very easily screw up your wiring. The key to doing this is taking your time and looking everything over twice before doing it.

Written by Daniel B Martin

If you want the clock display to remain at high intensity when the lights are on...

1) Remove the clock. This may be done with a small flat-blade screwdriver. Insert the screwdriver blade between the lower right hand corner of the plastic dashboard clock panel and the adjacent softer dash board. Slowly pry the panel up. Continue this at all four corners of the contoured panel until the metal snaps which anchor the panel are loose. Remove the panel by pulling outward and downward.

2) Note that the clock's electrical connector has four wires. Cut the wire which is red with a blue tracer.

3) Install the clock panel. It just snaps into place.

hd movies download dvd download
Login
Username

Password



Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.
Shoutbox
You must login to post a message.

12/12/2009 21:56
Check thermostat and seal, as well as apply new sealant on thermostat housing. If leak is not cured you may have a water pump issue.

12/12/2009 13:38
I have a 95 nissan maxima that is leaking anti-freeze during the 1st 5 minutes only. It appears to be dripping just about 12 inches to the right of the overflow bottle, near the thermostat housing.

18/11/2009 00:32
looking for wheels!!!! can anyone help me out with this??? i have a 97 maxima looking for 18x7.5 for the front and 18x8 in the rear.

17/11/2009 11:20
anybody wants to buy any 4th gen parts i also have 1 set of dek injector clips

12/11/2009 07:06
does anybody know where i can get a turbo kit for my 07 maxima, sedan, automatic with cvt?

Google Ads