NWP Engineering is proud to finally announce the release of the 00-01 Nissan Maxima Hardware Kit! This kit will allow you to install the 95-99 Maxima Thermal Intake Spacers on your 00-01 Intake Manifold.

Applications:
- 2000 Nissan Maxima (5th generation 3.0L DOHC V6 VQ30DE-K with EGR system)
- 2001 Nissan Maxima (5th generation 3.0L DOHC V6 VQ30DE-K w/o EGR system)

Note: The 95-99 Maxima Upper Intake Spacer included in this kit requires modification in order to be installed. Please refer to the installation instructions for full modification requirements.

-NWPEngineering

As mentioned above, modification of the UIM Spacer is required to allow the bolt holes to properly line up on the 00-01 Maxima Intake Manifold. But, the intake ports are a perfect match! The two Lower Intake Manifold Spacers fit flawlessly without any modification required. No throttle body spacer is included.

Please refer to the Modification Procedure for more information:
./VQ30DEK_4th_%20gen_UIM_%20Modifications.pdf


Includes:
- QTY 2 1/16" High Quality CNC Machined Phenolic Lower Intake Manifold Spacers
- QTY 1 1/4" High Quality CNC Machined Phenolic Upper Intake Manifold Spacer from the 95-99 Maxima Kit
- No Throttle Body Spacer is included
- QTY 6 Lengthened Zinc Plated Grade 8 Upper Intake Manifold bolts and washers
- QTY 2 Lengthened Zinc Plated Grade 8 Upper Intake Manifold offset studs
- QTY 2 Lengthened Zinc Plated Grade 8 EGR bolts and washers (only included with purchase of EGR Extension Kit)
- 1/4" High Quality CNC Machined Steel EGR Tube Extension Spacer (only included with purchase of EGR Extension Kit)
- QTY 2 High Quality CNC Machined Steel EGR Bolt Extension Spacers (only included with purchase of EGR Extension Kit)
- Printed Detailed Upper Intake Manifold Modification and EGR Extension Kit Installation Instructions with Photos
- Kit does not include full detailed instructions on how to install these spacers on your 00-01 Maxima. Please refer to the instructions for the 95-99 Maxima for specific spacer installation guidelines.
- Two Die Cut Silver Vinyl NWP Engineering Decals


Price: $195 (without EGR Extension Kit) and $225 (w/ EGR Extension Kit)