GTR Push Start Button
It doesn't get much easier than this!
First step was to pop the plastic piece on side off
Second is to pop off the plastic piece on the bottom of the steering wheel. Left side first!
Now go to the right side
You will then see a screw then holds the trim piece, unscrew with a Philips screwdriver
Next gently pop out the trim piece to gain access to the ignition switch
Next put your hand behind the ignition switch and push out GENTLY!
unplug the switch
Plug your GT-R one in
Screw back the screw
Pop in all the plastic trimming
And you are finished! Here are the pics