Error message

User warning: The following module is missing from the file system: file_entity. For information about how to fix this, see the documentation page. in _drupal_trigger_error_with_delayed_logging() (line 1128 of /home2/vqpower/public_html/v3/includes/bootstrap.inc).

Home Made 3" Cold Air Intake

Category: 

Home Made 3" Cold Air Intake

This is a simple 3foot 3" diameter aluminum flexhose. Normally used for a dryer vent.
This is a 3" to 3" Rubber coupler used to joint the flex hose to the bottom of the stock intake.
Flex hose connected to the stock intake via the rubber coupler.
Another shot of the flex hose connected to the stock airbox.
This is the opening I created in the front splash guard. That is a Rubber roofing pipe sealer that was used.
Shot of the opening from a far distance. This opening with that angle allows maximum amount of air to enter.