NWP Engineering Thermal Intake Spacer Kits for the 00-01 Maxima!
NWP Engineering is proud to finally announce the release of the 00-01 Nissan Maxima Hardware Kit! This kit will allow you to install the 95-99 Maxima Thermal Intake Spacers on your 00-01 Intake Manifold.
- 2000 Nissan Maxima (5th generation 3.0L DOHC V6 VQ30DE-K with EGR system)
- 2001 Nissan Maxima (5th generation 3.0L DOHC V6 VQ30DE-K w/o EGR system)
Note: The 95-99 Maxima Upper Intake Spacer included in this kit requires modification in order to be installed. Please refer to the installation instructions for full modification requirements.
As mentioned above, modification of the UIM Spacer is required to allow the bolt holes to properly line up on the 00-01 Maxima Intake Manifold. But, the intake ports are a perfect match! The two Lower Intake Manifold Spacers fit flawlessly without any modification required. No throttle body spacer is included.
Please refer to the Modification Procedure for more information:
- QTY 2 1/16" High Quality CNC Machined Phenolic Lower Intake Manifold Spacers
- QTY 1 1/4" High Quality CNC Machined Phenolic Upper Intake Manifold Spacer from the 95-99 Maxima Kit
- No Throttle Body Spacer is included
- QTY 6 Lengthened Zinc Plated Grade 8 Upper Intake Manifold bolts and washers
- QTY 2 Lengthened Zinc Plated Grade 8 Upper Intake Manifold offset studs
- QTY 2 Lengthened Zinc Plated Grade 8 EGR bolts and washers (only included with purchase of EGR Extension Kit)
- 1/4" High Quality CNC Machined Steel EGR Tube Extension Spacer (only included with purchase of EGR Extension Kit)
- QTY 2 High Quality CNC Machined Steel EGR Bolt Extension Spacers (only included with purchase of EGR Extension Kit)
- Printed Detailed Upper Intake Manifold Modification and EGR Extension Kit Installation Instructions with Photos
- Kit does not include full detailed instructions on how to install these spacers on your 00-01 Maxima. Please refer to the instructions for the 95-99 Maxima for specific spacer installation guidelines.
- Two Die Cut Silver Vinyl NWP Engineering Decals
Price: $195 (without EGR Extension Kit) and $225 (w/ EGR Extension Kit)