NWP Engineering VIAS Removal/SSIM Intake Manifold Block Plate!
The entire plate is CNC Machined out of 6061 Billet Aluminum and is 1/4" thick.
If you look closely in the 1st picture, you might notice a line above the "W" in the NWP logo. This line will be completely gone on the production run. Other than that, it's a beautiful piece! The plate will also include 3 replacement zinc plated flange head bolts of the correct length. That will make for a much cleaner install since they are silver zinc plated instead of yellow zinc plated like your factory bolts.
It will also include instructions on how to remove the VIAS system and install the plate. And a rubber plug will be included in order to cap off the vacuum source on the solenoid once the VIAS butterfly plate has been removed. The bolts shown in the picture are not the type that will be included in the kit. They will be a flanged hex head bolt similar to the stock bolts, but they will be the correct length and have a silver zinc plated finish.
This plate is expected to be available for sale within the next 3 weeks. An official price has not been determined just yet, but it's expected to be around $50-60.